hasenkopf_produkte_schubladen_nach_mass.jpg

DRAWERS MADE TO MEASURE

We manufacture drawers with different materials, in all types of constructions, with know-how, precision and efficiency. Your complete drawers are delivered ready to assemble: doweled, dovetailed or mitered, glued, painted or natural wood, with notches and borings for all types of runner systems. Extensibles will be delivered on request.
We manufacture per commission - made to measure and in any desired quantity, even just one or in serial production with just-in-time delivery. We have all materials on stock therefore we are able to guarantee short lead times and are able to react flexible. Besides high-quality and fair prices we set great value on comprehensive service.

You can make an enquiry or place an order for drawers here!

Material

Solid wood profiles
13 mm

Material Massivholz Eiche

Types of wood
› oak (European)
› beechwood (steamed)
› maple (European)
› walnut (American)
› other types of wood on request

Thickness
13 mm

Heights
› 80, 100, 120, 140, 160, 180 mm
› intermediate sizes possible

Base
› standard - veneered MDF: 7 mm
› strenthened - veneered chipboard: 13 mm

Corner joints
S4, S3, GZ4, GZ3, SED, SEZ

Surface
› natural, painted, oiled
› data sheet for paints / oils on request

Plywood
12 mm

Schublade aus Sperrholz

Types of wood
› birchwood
› other types of wood on request

Thickness
12 mm

Heights
80, 100, 120, 140, 160, 180, 200, 240, 280 mm

Base
› standard - plywood: 6 mm
› strengthened: 9, 12 mm

 

Corner joints
S4, S3, GZ4, GZ3, SD, SDV, SDH, SED, SEZ

Surface
› natural, painted, oiled
› Data sheets for paints / oils on request

Details
› standard: plywood edge visible
› on request: upper visible edges veneered

Plastic covered MDF profiles
12,5 mm

folienummanteltes MDF

Colour
white

Thickness
12,5 mm

Heights
› 90, 130, 160, 220 mm
› The material is pre-profiled, we are therefore unfortunately unable to offer intermediate heights. Please contact us for alternative solutions.

Base
› standard - coated chipboard: 8 mm
› strengthened: up to 16 mm

Corner joints
S4, S3, SD, SDV, SDH

Coated chipboard profiles
8 | 12 mm

beschichtete Spanplatte

Decor
› white
› grey
› black
› special decor on request

Thickness
› 8 mm
› 12 mm

Heights
› 80, 100, 120, 140, 160, 180, 200, 240, 280 mm
› intermediate heights possible

Base
› chipboard to match the side of the drawer
› standard: 8 mm
› strengthened: 12 mm

Corner joints
S4, S3, SED

Surface
miniperl (PE)

Details
› upper edge: 2 mm ABS edge
› lower edge: 0,4 mm Melamin edge

Corner joints

Doweled
on 4 sides

Schubladen-Eckverbindung gedübelt

Article no.
S4

Design
all profiles

Base
slotted in on all sides

Doweled
on 3 sides

gedübelte Schublade aus Massivholz

Article no.
S3

Design
all profiles

Base
› slotted in on 3 sides
› with projection at front for the customer to attach fronts

Finger-jointed
on 4 sides

4-seitig fingergezinkte Schublade

Article no.
GZ4

Design
› solid wood and plywood
› 10 mm finger joints

Base
slotted in on all sides

Finger-jointed
on 3 sides

Eckverbindung 3-seitig gezinkt

Article no.
GZ3

Design
› solid wood and plywood
› 10 mm finger joints

Base
› slotted in on 3 sides
› with projection at front for the customer to attach fronts

Mitered on 3 sides

Schublade auf Gehrung verleimt

Article no.
SDV / SDH

Design
› MDF and plywood
› SDV: sides and back mitered; front doweled between them
› SDH: sides and front mitered; back doweled between them

Base
slotted in on all sides

Mitered on 3 sides
With no front

Schublade Eckverbindung auf Gehrung

Article no.
SD

Design
› MDF and plywood
› sides and back mitered
› without front

Base
› slotted in on 3 sides
› with projection at front for the customer to attach false fronts

Special designs & special processing

Cutout for plumbing fixtures

Schublade mit Siphonausschnitt

Corner joints
› S4: for all materials
› GZ4: for solid wood and plywood
› SDV/SDH: for MDF and plywood

Cutout
visible corner joints are always mitered on 3 sides

Details
› cutout for plumbing fixtures at the back
› dimensions freely selectable
› position freely selectable

Please note:
› especially for bathroom and kichten
› also available with inserts and trays

Borings & Notches

Schublade mit Bohrungen

Borings in the front for the customer to attach a trim
(sketches available on request)

Nothes, machined grooves and borings for runner systems
We will carry out any desired processing. Please indicate the type of runner system and the exact dimensions when ordering.

Fronts

Schubladen-Front mit Glas-Leiste

Design
› fronts with glass panel as U frame
› fronts with glass panel as frame with glass strip
› We offer special solutions for inner drawers as well.

Details
› The glass panel is fixed in the prepared frame by the customer.
› On request we also supply fronts with glass panels as a ready-to-install drawer.

Handles

Schublade mit Griffmulde

Recess rounded
› drawer width up to 800 mm: 120 x 25 mm
› drawer width from 800 mm: 150 x 25 mm

Recess angular
› drawer width up to 800 mm: 120 x 25 mm
› drawer width from 800 mm: 150 x 25 mm

Lengthwise cutout
› drawer width up to 800 mm: 120 x 25 mm
› drawer width from 800 mm: 150 x 25 mm

Hole
› drawer height up to 200 mm: 25 mm diameter
› drawer height from 200 mm: 35 mm diameter

Triangle
› 50 x 25 mm

Details
Special designs as requested by the customer are possible. Please indicate the exact dimensions and position when ordering.

Freeform

Hasenkopf Schubladen nach Maß

We manufacture customized furniture fronts.
› curved to a specified radius
› slanted

Inner drawers, low fronts & drawer-container

Inner drawer
straight

Innenschublade

Article no.
Inner drawer

Corner joints
› S4: for all materials
› GZ4: for solid wood and plywood
› SDV/SDH: for MDF and plywood

Front
› free choice of heights
› on request with projections to cover the runner system: doweled left and right 1,5 mm to 5 mm, underneath 15 mm; finger-jointed 10 mm underneath only

Low-fronts
sloping

Englischer Zug geschrägt

Article no.
SED / SEZ

Corner joints
› SED: for all materials
› SEZ: for solid wood and plywood

Details
› 10 mm finger joints
› sides slanted at an angle of 45°

Front
standard heights: projections half the height of the side to cover the runners

Low-fronts
curved

Schublade mit englischem Zug geschweift

Article no.
SED curved / SEZ curved

Corner joints
› SED: all materials
› SEZ: for solid wood and plywood

Details
› 10 mm finger joints
› curved sides

Front
standard heigths: projections half the height of the side to cover the runners

drawer-container

Schütte

Details
› S4: for all materials
› GZ4: for solid wood and plywood

Base
› flush mount
› slotted in on all sides

Handles
› recess rounded: 120 x 25 mm
› recess angular: 120 x 25 mm
› lenghtwise cutout: 120 x 25 mm
› hole: Ø 25 mm
› triangle: 50 x 25 mm

subdivisions & trays

Internal Subdivisions

Schublade mit variabler Einteilung

Design
› fixed subdivisions at your specified positions
› removable subdivisions on pegs
› adjustable subdivisions on a pre-bored grid
› subdivisions running in a machined groove

Details
› subdivisions with thickness 8 mm possible up to height 140 mm
› We will also manufacture individual subdivisions according to your specifications.
› We offer a range of subdivisions for kitchen drawers.

Trays

Schublade mit herausnehmbarem Einsatz

Design
› removable trays
› different layers possible

Details
› trays with thickness 8 mm possible up to height 140 mm
› We will also manufacture individual trays according to your specifications.
› We offer a range of trays for kitchen drawers.

Internal subdivisions
flocked

beflockte Einteilung

Details
› for removable trays
› for drawers with fixed subdivisions

Colours
different colours available

Please note:
Particularly suitable for jewelery, glasses, cutlery and other valuable contents.

Freeform 
flocked

Beflockung in 3D-Freiform

Details
› flocked MDF
› individual 3D form according to your specification

Colours
different colours available

Please note:
Particularly suitable for jewelery, glasses, cutlery and other valuable contents.

Runner Systems Sub-Base

Blum Tandem

Types
› TDV/TDVM fully-extensible, without or with soft close
› TDVT/TDVTS fully-extensible, with Tip-On function, without or with synchronization
› TD/TDM partially-extensible, without or with soft close

Loading capacity
30 and 50 kg

Please note:
› On request, we will also mount the couplings (clipse).
› Side stabilisers can be included on request.
› You can find the sketches for borings in the download area.

Blum Movento

Types
› MOVM fully-extensible, with soft close
› MOVT/MOVTS fully-extensible, with Tip-On function, without or with synchronization
› MOVTM/MOVTMS fully-extensible, with Tip-On function and soft close, without or with synchronization

Loading capacity
40 and 60 kg

Please note:
› On request, we will also mount the couplings (clipse).
› Side stabilisers can be included on request.
› You can find the sketches for borings in the download area.