washstands made of corian
Our Corian washstands fulfill all possible aesthetic and functional demands and are available in a large number of designs and with many different features. They can be made to measure for any desired preforms for washbasins.
Surfaces & Covers
Surface 12 mm
without supporting panel
Article no.
Z13
Details
› solid surface material as Corian: 12 mm thick
› without substructure
Visible edges
› shaped as desired (e.g. rounded or chamfered)
Surfaces
› can be constructed in any desired size, including extra deep and oversize lengths
› may need to be glued on site
Surface glued
to supporting panel
Details
› solid surface material like Corian: 12 mm thick
› glued onto wooden substructure
› standard chipboard in white, other supporting panels on request
Visible edges
› covered with Corian and shaped as desired (e.g. rounded or chamfered)
Surfaces
› can be constructed in any desired size, including extra deep and oversize lengths
› some joints may be necessary
Edge Style
Normal Edge
Article no.
FN-400 to 1200
Heights
› standard: 12, 24, 30, 40 mm
› special and intermediate heights on request
Edges can be shaped in various ways
› rounded
› chamfered
› slightly blunted
Raised Edge
normal
Article no.
FSW-400 to 1200
Edge height
› worktop + 3 mm
Heights
› standard: 33, 43 mm
› special and intermediate heights on request
Raised Edge
Laboratory
Article no.
FLSW-400 to 1200
Edge height
› worktop + 10 mm
Edge width
› 20 mm
Heights
› standard: 34, 40, 50 mm
› special and intermediate heights on request
Fully Rounded Edge
Article no.
FV-400 to 1200
Heights
› standard: 12, 24, 30, 40 mm
› special and intermediate heights on request
Angled Edge
Article no.
FW-400 to 1200
Heights
› standard: 24, 30, 40 mm
› special and intermediate heights on request
Angles
› standard: 45°
› special anlges on request
lips
Article no.
SH-100 to SH-600
Visible eges
› covered with solid surface
› various edge heights possible
› various styles (e.g. rounded, chamfered or according to the customer's specification)
Corian Coating
on underside
Article no.
PLAU
Details
› Where visible, undersides are covered with Corian.
Special Edge
Special edges
› on request
Trims & Edge shapes
Slanted Trim
Article no.
A500
Beveled
› as per the customer's measurements
Edge styles
› all
Curved Trim
with radius
Article no.
R500
Curved
› as per the customer's measurements
Edge styles
› standard with normal edge
› raised, fully rounded and angled edges available at additional cost
Curved trim
with Arc
Article no.
BG
Circular measure (length and depth)
› as per the customer's measurements
Edge styles
› standard with normal edge
› raised, fully rounded and angled edges available at additional cost
Wall trims
Upstand
Butt jointed
Article no.
WAPL / WAPV
Upstand
› supplied loose for gluing on site
› butt jointed, firmly glued
Thickness
› 12 mm
Heights
› standard: up to 50 mm
› special heights on request (from 50 mm at extra cost)
Upper edge
› rounded or chamfered as specified by the customer
Upstand 6 mm
with cove
Article no.
WAPH
Upstand
› with cove
› internal radius: 5 mm
› only possible firmly glued
Thickness
› 6 mm
Heights
› standard: up to 50 mm
Upper edge
› rounded or chamfered as specified by the customer
Upstand 12 mm
with cove
Article no.
WAPH13
Upstand
› with cove
› internal radius: 5 mm or 9 mm
› only possible firmly glued
Thickness
› 12 mm
Heights
› standard: up to 50 mm
› special heights on request (from 50 mm with surcharge)
Upper edge
› rounded or chamfered as specified by the customer
Upstand
At Back of Recess
Article no.
NRW-13 / NRW-WAP
Upstand at back of recess
› horizontal or vertical tongue and groove joint
› supplied loose for gluing on site
› on request also with V chamfering
Thickness
› 12 mm
Heights
› seamless up to 3648 x 750 mm;
› extra widths possible with gluing
Upper edge
› visible edges can be processed
Types of Basin installation
Subsurface
Seamless
Standard installation variants for solid surface basins
› casted Hasenkopf MIRAKLON® basins
› thermoformed Hasenkopf Fontana basins
› casted DuPont Corian basins
Cutouts
basins on site
Article no.
WASCH-AA
Standard installation variants for basins installed on site
› e.g. ceramic basins
Cutout
› to receive basin on site
› no edge processing
Basin installation
› by the customer
Subsurface
basins on site
Article no.
SPÜLU / SPÜLM
Standard installation variants for basins installed on site
› e.g. ceramic basins
Cutout
› into the Corian surface
› with processed edges
Subsurface installation of supplied basins (e.g. ceramic)
› We select a suitable overlap for the tolerances of the specific basin.
Cutouts & shapes
Towel holder
Precut
Article no.
HAND-300
Dimensions
› 300 to 500 x 50
Special designs
› on request
Kleenex box
Precut
Article no.
KLEENEX
Design
› Please make sure the hole is at least 135 mm from the edge of the Corian section.
Borings
Cutouts
Borings
› mixing faucets, power sockets, cable housing, soap dispenser, pulling knob
› please specify the exact diameter and position
Cutouts
› round or rectangular
› edges can be processed
› special sizes on request
Faucet mount
› height: 10 mm
› on request, please state external and bore diameter
Shaped recess
for soap
Article no.
SEIFE
Depth
› 4 mm
Special designs
› on request
Assembly & Accessories
Panel connectors
profi, loose
Article no.
APLP
Connection
› loose
Design
› internal corners at transition with radius
› prepared for gluing on site
› including plate connectors and matching Corian glue (plus glue gun)
Advantage of profile connectors
› facilitate easy adjustments during the installation, including fitting corners
› no longer any need to bore out the corner
Panel connectors
simple, loose
Article no.
APLE
Connection
› loose
Design
› internal corners butt jointed
› prepared for gluing on site
› including panel connectors and matching Corian glue (plus glue gun)
Installation
Accessories
Naturally, you can obtain all the accessories required for the installation from us.
› colour-matched Corian glue
› glue gun
› mounting brackets
› sanding set
We will be happy to give you further information. Please contact us.
