WORKTOPS MADE OF CORIAN
Worktops play an important role in many living and working areas. Whether in private kitchens, laboratories, hospitals, gastronomies or in shops - Corian worktops allow individual and functional solutions.The individual manufacturing takes place according to your specifications. Measurement and montage service is feasible on request. We will gladly assist you with planning your individual worktop.
Surfaces & Covers
Surface 12 mm
without supporting panel
Article no.
Z13
Details
› solid surface material as Corian: 12 mm thick
› without substructure
Visible edges
› shaped as desired (e.g. rounded or chamfered)
Surfaces
› can be constructed in any desired size, including extra deep and oversize lengths
› may need to be glued on site
Surface glued
to supporting panel
Details
› solid surface material like Corian: 12 mm thick
› glued onto wooden substructure
› standard chipboard in white, other supporting panels on request
Visible edges
› covered with Corian and shaped as desired (e.g. rounded or chamfered)
Surfaces
› can be constructed in any desired size, including extra deep and oversize lengths
› some joints may be necessary
Edge Styles
Normal Edge
Article no.
FN-400 to 1200
Heights
› standard: 12, 24, 30, 40 mm
› special and intermediate heights on request
Edges can be shaped in various ways
› rounded
› chamfered
› slightly blunted
Raised Edge
normal
Article no.
FSW-400 to 1200
Edge height
› worktop + 3 mm
Heights
› standard: 33, 43 mm
› special and intermediate heights on request
Raised Edge
Laboratory
Article no.
FLSW-400 to 1200
Edge height
› worktop + 10 mm
Edge width
› 20 mm
Heights
› standard: 34, 40, 50 mm
› special and intermediate heights on request
Fully Rounded Edge
Article no.
FV-400 to 1200
Heights
› standard: 12, 24, 30, 40 mm
› special and intermediate heights on request
Angled Edge
Article no.
FW-400 to 1200
Heights
› standard: 24, 30, 40 mm
› special and intermediate heights on request
Angles
› standard: 45°
› special anlges on request
lips
Article no.
SH-100 to SH-600
Visible eges
› covered with solid surface
› various edge heights possible
› various styles (e.g. rounded, chamfered or according to the customer's specification)
Corian Coating
on underside
Article no.
PLAU
Details
› Where visible, undersides are covered with Corian.
Special Edge
Special edges
› on request
Trims & Edge shapes
Slanted Trim
Article no.
A500
Beveled
› as per the customer's measurements
Edge styles
› all
Curved Trim
with radius
Article no.
R500
Curved
› as per the customer's measurements
Edge styles
› standard with normal edge
› raised, fully rounded and angled edges available at additional cost
Curved trim
with Arc
Article no.
BG
Circular measure (length and depth)
› as per the customer's measurements
Edge styles
› standard with normal edge
› raised, fully rounded and angled edges available at additional cost
Wall trims
Upstand
Butt jointed
Article no.
WAPL / WAPV
Upstand
› supplied loose for gluing on site
› butt jointed, firmly glued
Thickness
› 12 mm
Heights
› standard: up to 50 mm
› special heights on request (from 50 mm at extra cost)
Upper edge
› rounded or chamfered as specified by the customer
Upstand 6 mm
with cove
Article no.
WAPH
Upstand
› with cove
› internal radius: 5 mm
› only possible firmly glued
Thickness
› 6 mm
Heights
› standard: up to 50 mm
Upper edge
› rounded or chamfered as specified by the customer
Upstand 12 mm
with cove
Article no.
WAPH13
Upstand
› with cove
› internal radius: 5 mm or 9 mm
› only possible firmly glued
Thickness
› 12 mm
Heights
› standard: up to 50 mm
› special heights on request (from 50 mm with surcharge)
Upper edge
› rounded or chamfered as specified by the customer
Upstand
At Back of Recess
Article no.
NRW-13 / NRW-WAP
Upstand at back of recess
› horizontal or vertical tongue and groove joint
› supplied loose for gluing on site
› on request also with V chamfering
Thickness
› 12 mm
Heights
› seamless up to 3648 x 750 mm;
› extra widths possible with gluing
Upper edge
› visible edges can be processed
Types of sink installation
Subsurface
seamless
Standard installation variants for solid surface sinks
› thermoformed Hasenkopf Fontana sinks
› casted DuPont Corian sinks
Cutouts
sinks on site
Article no.
SPÜL-E
Installation variants for sinks installed on site
› e.g. stainless steel sinks
Cutout
› for surface mounted sink installed on site
› no edge processing
Sinks installed
› by the customer
Subsurface
sinks on site
Article no.
SPÜLU / SPÜLM
Installation variants for sinks installed on site
› e.g. stainless steel sinks
Cutout
› into the Corian / Hi-Macs surface
› with processed edges
Subsurface installation of the stainless-stell or ceramic sink provided
› We select a suitable overlap for the tolerances of the specific stainless-steel or ceramic sink.
Installation
flush with the surface
Article no.
SPÜL-FED
Installation variant for stainless steel sinks
› including cutout, grooves and installation
› shaped precisely to the contours of the sink
› we supply the sink ready-mounted
Please note:
› Some manufacturers market stainless-steel sinks for flush installation that cannot be installled flush in Corian surfaces. Please contact us if you have doubts.
Cutouts & Shapes
Borings
Cutouts
Borings
› mixing faucets, power sockets, cable housing, soap dispenser, pulling knob
› please specify the exact diameter and position
Cutouts
› round or rectangular
› edges can be processed
› special sizes on request
Faucet mount
› height: 10 mm
› on request, please state external and bore diameter
Cooker Hobs
Article no.
HEDISO / HERDSISO / HERDISO-F
Cutouts for cooker hobs
› for surface-mounted hobs
› including double heat insulation (please enclose a copy of the manufacturer's dimension plan)
› flush subsurface installation is available on request, but this is excluded from all warranties
Ventilation slits
Article no.
LSC / LGCH
Ventilation slits (cut into the Corian)
› slitted area: 500 x 70 mm
› 8 slits each 240 x 10 mm
› air throughput: 192 cm³
Ventilation grille (inserted flush with the surface and removable)
› external dimensions: 500 x 90 mm
› 8 slits each 210 x 10 mm
› air throughput: 184 cm³
Special dimensions and shapes
› on request
Hot-rods
for saucepans
Article no.
EDEL / EDEL-S
Hot-rods
› made of stainless steel
› to protect the worktop near to the stove
Standard size
› five removeable hot-rods
› 300 mm long and 12 mm in diameter
Special designs
› lengths and arrangement as per the customer's specification
› on request
Drainage grooves
Article no.
ATROR / ATROS / SARI
Design
› straight, depth of cut levels off from ca. 4 mm to 1 mm;
› for installed Corian sinks or subsurface-installed stainless-steel sinks
› length: ca. 350 mm
Special groove designs available
› lengths and arrangement as per the customer's specification
› on request
Drainage grooves
› ca. 4 mm deep, ca. 8 mm wide
Deep Depression
Leveling off
Article no.
ATROT
Drainage area
› depth of cut levels off from ca. 4 mm to 1 mm
› seamlessly ground
Length
› ca. 350 mm
Drop
› ca. 3 mm
Caution
› There may be some slight differences in the colour structure.
Deep depression
with rim
Article no.
ATROTS
drainage area
› deep depression, special design
Height
› 3 mm high step; right around the sink; with no slope
Manufactured
› as per customer's specification
Caution
› There may be some slight differences in the colour structure.
Assembly & accessories
Panel connectors
profi, loose
Article no.
APLP
Connection
› loose
Design
› internal corners at transition with radius
› prepared for gluing on site
› including plate connectors and matching Corian glue (plus glue gun)
Advantage of profile connectors
› facilitate easy adjustments during the installation, including fitting corners
› no longer any need to bore out the corner
Panel connectors
simple, loose
Article no.
APLE
Connection
› loose
Design
› internal corners butt jointed
› prepared for gluing on site
› including panel connectors and matching Corian glue (plus glue gun)
Installation
Accessories
Naturally you can obtain all the necessary installation fittings and fitments through us:
› colour-matched Corian glue
› glue gun
› worktop connectors
› sanding set
We will be happy to give you further information. Please contact us.
